Self Lubricated Sump Pump
Self Lubricated Sump Pump
Self Lubricated Sump Pump works in almost any installation, particularly where space is tight or where the liquid just cannot be lifted the usual way – whether that is because of high temperature, heavy solids, or the corrosive nature of the fluid. These pumps are made for situations where suspended particles or fibrous material in the liquid would block or damage a regular pump within weeks. A Non Clog Sump Pump and Solid Handling Sump Pump both run equally well on continuous duty or intermittent cycles, pushing through difficult media without jamming or breaking down mid-operation.
Because the bearing lubricates itself, there is no separate lubrication schedule to follow and no greasing points to miss. That alone cuts down a significant chunk of the usual maintenance routine. A Drainage Pump built this way handles pits and sumps where grit, sludge, and solids show up regularly in the incoming fluid – the kind of conditions where a standard pump would wear out fast. The Pedestal Pump keeps the motor and bearing sitting well above the liquid, so even if the sump gets messy or the fluid level rises unexpectedly, the working parts stay protected and are easy to get to when a check is needed.
As a Self Lubricated Sump Pump manufacturer, we build pumps that hold up in the kind of tough, dirty, and demanding conditions most standard pumps are simply not designed for.
Applications
These pumps are in extensive use in the fields of:
- Pollution Control.
- Filtration .
- Slurries .
- Transferring Corrosive Chemicals .
- Bio gas plants.
- Any types of acidic water lifting .
- M.S Vertical pumps are used for the transfer of sulphuric acid 98%
- Sewage.
- Waste water treatment plant.
- Phosphoric Acid Plant. H,PO,HSIF, 2 s H2SO4, HF And .Their Mixtures.
- Gas washing plant .
- Scrubbed liquids containing , F,Cl,SO2, Ammonia
- Water treatment plant .
- OLUM, CLOTO, NEPTHA
Range
| Parameter | Specification |
|---|---|
| Flow Rate | 200 to 6000 m3 /hr |
| Discharge Head | 4 to 28 m |
| Pump Speed Range | 750 to 1500 rpm |
| Max Solids Size | Up to 100 mm |
| Pump Casing | Cast Iron / Stainless Steel |
| Impeller | Stainless Steel |
| Pump Shaft | ST ST ASTMA-276 TYPE 410 ,Carbon Steel |
| Different Sizes | APM250/34 , APM300/34 , APM350/47, APM400/47, APM450/54 |
Related Products
Self Lubricated Sump Pump by Malhar Pump
These pumps are made for conditions that wear out standard equipment fast. Continuous duty or intermittent operation - the Self Lubricated Sump Pump manages both without performance falling off. A Non Clog Sump Pump variant handles stringy, fibrous, or solid-laden media without jamming mid-operation. Suction extensions, float switches for automatic control, and duplex configurations are all available so the pump fits your actual site requirement rather than the other way around.
Why Choose This Pump
These pumps do not struggle in tough conditions - that is the whole point of their design. Continuous duty or intermittent operation, the Vertical Sump Pump handles both without performance dropping off. Suction extensions, float switches, and duplex configurations are all available so the pump fits your site rather than the other way around. A Stainless Steel Sump Pump and PP Sump Pump variant are also on offer, depending on what your fluid and chemical compatibility demands.
Performance and Range
- Maximum working temperature: 110°C / 200°C depending on model
- Available lengths: 1 foot up to 12 feet
- Flow capacity: up to 500 m³/h, higher available on request
- Head: up to 120 meters, multi-stage versions for more demanding applications
- Custom-built models available for special media or high-head requirements
Models You Can Choose
- Standard Self Lubricated Sump Pump for general industrial sump applications
- Non Clog Sump Pump for fibrous, stringy, or solid-carrying fluids
- Solid Handling Sump Pump for heavy slurry and abrasive media
- Drainage Pump for pits, tanks, and low-level liquid collection sumps
- Pedestal Pump where motor and bearing protection above the liquid level is needed
- Duplex pumping station with auto float switch control
- Extended suction models for deeper tanks or pits
Where They Work Best
Industries use our sump pumps in many ways:
- Wastewater and effluent treatment plants handling sludge and solids daily
- Paper and textile industries, where fibrous material clogs standard pumps
- Chemical plants where a Drainage Pump is needed for pit and sump clearance
- Food processing and distillery units with thick or solid-laden waste streams
- Any application where a Solid Handling Sump Pump is needed for abrasive or heavy media
- Industrial setups where a Pedestal Pump keeps critical components away from the fluid
Any process that needs a contamination-free pumping system.
Benefits You Get
- Self-lubricating bearing – no greasing schedule, no missed maintenance
- Non Clog Sump Pump design prevents blockages even with fibrous or chunky media
- Solid Handling Sump Pump construction takes on abrasive fluids without wearing out fast
- Pedestal Pump layout keeps motor and bearings well above the liquid – protected and easy to inspect
- Drainage Pump variants handle low-level sumps and collection pits efficiently
- Float switch and duplex options make the whole system automation-ready
Backed by one of the trusted sump pump manufacturers with years of expertise.
Installation and Support
Before finalising a model, share your process details – fluid type, solid content, sump depth, temperature, and required flow rate. That is what helps us point you to the right Self Lubricated Sump Pump without any back and forth later. Once installed, routine inspection is enough to keep these running long term, even in the heaviest and dirtiest applications.
Get a Quote
Need a Self Lubricated Sump Pump for your plant or treatment facility? Talk to our team and tell us what your process looks like. Whether that turns out to be a Non Clog Sump Pump, a Solid Handling Sump Pump, a Drainage Pump, or a Pedestal Pump – we will sort out the right fit and back it up with complete technical support from selection to installation.
Stay connected with us on YouTube and Facebook for the latest updates on fire fighting engines, pump systems, and industrial solutions
FAQ
What makes a Self Lubricated Sump Pump different from a standard sump pump?
The bearing lubricates itself, so there is no external greasing needed. That reduces maintenance significantly and keeps the pump running longer in dirty or abrasive conditions.
Can a Non Clog Sump Pump handle fibrous or solid-laden fluids without jamming?
Yes. The Non Clog Sump Pump is specifically designed for fluids carrying fibrous material, rags, or suspended solids that would block a regular pump quickly.
Where does a Pedestal Pump work better than a standard vertical sump pump?
A Pedestal Pump works better where the fluid is particularly aggressive or where keeping the motor and bearing away from the liquid level adds a meaningful layer of protection and easier access during servicing.
Engineered for Reliable & Innovative Fluid Solutions
Gen Creative Engineers Limited is a trusted manufacturer of high-performance pumps and fluid handling systems. With a commitment to quality, innovation, and safety, we serve diverse industries with reliable, efficient, and customized engineering solutions.
Contact Info
Quick Links
Our Products
Trust Badges
- ISO 9001:2008 Certified
- Make in India
- CE / Fire Safety / OEM Approved (if applicable)
Copyright © 2026 Gen Creative Engineers Limited | All rights reserved