Sand Handling Pump

Sand Handling Pump – Reliable Performance Where Ordinary Pumps Fail by Malhar Pump

Sand does not go easy on equipment. Wherever it moves through a pump – mining sites, dredging operations, construction dewatering – it grinds away at internals that were never built to handle that kind of abrasion. Most standard pumps fail fast under that load. At Malhar Pump, every Sand Handling Pump is engineered specifically for it – reinforced internals, wear-resistant materials, and a build that keeps performing long after ordinary equipment has worn through.

Most site operators are not looking for a pump packed with unnecessary complexity. What they need is something that starts when it should, moves heavy sand-laden fluid without choking, and keeps that output steady day after day. That is exactly what our Sand Handling Pump range is built to deliver.

This same construction standard runs through our Ash Handling Pump and Solid Handling Pump lines too – because abrasive material never gets easier just because the application changes.

Applications

These pumps are in extensive use in the fields of:

Dairy processing
Food & Beverage processing
Pharmaceutical liquid handling
Chemical transfer and circulation
Hygienic and sanitary process lines
Homogenized and emulsified products
Cosmetic and personal care liquids

Edible oil and fat processing
Water and utility services
CIP (Clean-in-Place) systems
Brewery and distillery processes
Sugar syrup and glucose handling
Paints, inks, and coating liquids
Low to medium viscosity fluids

Range

Parameter	Specification
Flow Rate	200 to 6000 m³/hr
Discharge Head	4 to 50 MWC (Up to 5 Bar)
Pump Speed (RPM)	2800 / 1400 / 750 / 1500 rpm
Operating Temperature	Up to 140°C
Impeller Diameter	80 mm to 185 mm
Max Solids Size	Up to 100 mm
Pump Casing	Single Piece, Uniform Wall Thickness (SS)
Material of Construction (MOC)	SS 304 / SS 316
Impeller	High Precision Stainless Steel (Dynamic Balanced)
Pump Shaft	SS ASTM A276 Type 410 / Carbon Steel
Seal Type	Single Shaft Mechanical Seal
Gasket Material	Nitrile / Silicon / EPDM (Optional)
Motor Type	Foot Cum Flange Mounted Motor
Power Source	Single Phase / Three Phase
Connections	SMS Union / Welded / Expandable Type
Different Sizes / Models	APM250/34, APM300/34, APM350/47, APM400/47, APM450/54

Pump Capacity

HP	Head	Discharge	Amps
0.5	2 MWC	7000 LPH	0.5
0.5	4 MWC	5000 LPH	0.45
0.5	6 MWC	4000 LPH	0.3
1	8 MWC	14000 LPH	1.3
1	10 MWC	10000 LPH	1.2
1	12 MWC	8000 LPH	1.4
1.5	8 MWC	14000 LPH	1.4
1.5	10 MWC	12000 LPH	1.2
1.5	16 MWC	4000 LPH	0.9
2	12 MWC	20000 LPH	2.56
2	16 MWC	15000 LPH	2.6
2	20 MWC	8000 LPH	2.6
3	16 MWC	24000 LPH	3.6
3	20 MWC	16000 LPH	3
3	28 MWC	7500 LPH	2.5
5	20 MWC	30000 LPH	6.4
5	28 MWC	25000 LPH	5.8
5	30 MWC	10500 LPH	4.6
7.5	25 MWC	38000 LPH	9.6
7.5	30 MWC	32000 LPH	8.7
7.5	40 MWC	16000 LPH	7

Why Facilities Keep Choosing This Technology

Reliability is what earns a pump its place on a site for years, not a feature list on a brochure. A well-built unit works consistently through demanding conditions, and on a job site where downtime costs real money, that consistency is worth more than anything else.

Facilities regularly find that our pumps:

Move high-concentration sand slurry without frequent blockages
Resist abrasive wear far longer than standard pump construction
Maintain steady output even as slurry density shifts through the day
Operate continuously across long shifts with minimal supervision
Handle variable particle sizes without losing pumping efficiency

This is also why our Ash Handling Pump and Solid Handling Pump models see such strong repeat business – once a site sees how long these units hold up, they stop switching between brands.

Strength That Proves Itself Over Time

A pump’s real worth shows up months into hard use, not in a spec sheet. Every Sand Handling Pump from Malhar Pump is built to absorb continuous abrasive wear without a drop in efficiency. Internal components are selected specifically for extended service life under gritty, high-solids conditions, which means fewer replacements, lower maintenance costs, and considerably less unplanned downtime on site.

This matters most in mining and dredging work, where sand transfer runs nearly nonstop. A pump that wears out quickly does not just add cost – it stalls a process that is meant to keep moving. Our units are built to match that pace instead of falling behind it.

Works Across Multiple Industries and Applications

Sand-laden fluid shows up in more places than most people expect. Our units are regularly used in:

Mining and quarrying – sand and ore slurry transfer
Dredging operations – riverbed and coastal sand extraction
Construction sites – dewatering with heavy sediment loads
Sand processing plants – washing and grading operations
Foundries – abrasive sand slurry handling in casting processes

Whether you need a dedicated Sand Handling Pump for mining or construction, an Ash Handling Pump for power generation, or a heavy-duty Solid Handling Pump for general abrasive material – there is a configuration from Malhar Pump ready for your application.

Simple Setup, Predictable Long-Term Operation

No site wants a slow installation process or a complicated commissioning routine. Our units are designed to integrate into existing systems and pipelines without creating disruption. Once commissioned, routine inspection and scheduled maintenance are typically all it takes to keep performance where it should be.

Just share your sand concentration, particle size, and flow rate requirements – and our team will help you land on the right configuration from day one.

Get The Right Pump For Your Application

If your current setup is clogging often, wearing out faster than expected, or struggling to keep up with heavy sand slurry, it is time for a proper fix. Whether you need a dependable unit for mining or dredging, an Ash Handling Pump for a power plant, or a Solid Handling Pump for general abrasive processing – Malhar Pump has the right unit ready for your line.

Talk to our team today. Tell us what you are moving, and we will take it from there.

Explore Malhar Pump’s complete range – Solid Handling Pump, Pressure Pump, Booster Pump, Ash Handling Pump, and Sand Handling Pump – engineered for reliable, long-lasting performance across every industrial application.

Frequently Asked Questions

Q1. What makes a Sand Handling Pump different from a standard slurry pump? A standard slurry pump handles general solids-laden fluid. This equipment is built specifically for high-concentration sand and grit, which wears down ordinary components far faster – so the internal materials and construction are selected for extended resistance to that kind of abrasive load.

Q2. How long do internal components typically last under continuous sand slurry? It depends on particle size and concentration, but a properly built unit lasts considerably longer than a standard pump under the same conditions. Sharing your operating hours and slurry density helps our team give a realistic maintenance estimate.

Q3. Can the same pump handle both fine sand and coarser gravel mixtures? In many cases, yes, though the configuration may need adjustment based on particle size distribution. Our team reviews your specific material characteristics before recommending the right build for your site.

Explore our YouTube channel for insights into hygienic pump technologies, and stay connected on Facebook for the latest biotech and pharmaceutical pumping solutions.