Hot Water Transfer Pump
Hot Water Transfer Pump | Malhar Pump
A Hot Water Transfer Pump earns its place wherever a fluid moving through the system is simply too hot for a standard pump to handle without breaking down. High-temperature drain sumps, hot condensate lines, industrial processes running fluid well above ambient temperature – this is where ordinary pumps fail early, and a Hot Water Transfer Pump is what actually holds up. At Malhar Pump, we build ours for that exact demand, not for a spec sheet that reads fine on paper and falls apart on site.
Applications
These pumps are in extensive use in the fields of:
- Pollution Control.
- Filtration .
- Slurries .
- Transferring Corrosive Chemicals .
- Bio gas plants.
- Any types of acidic water lifting .
- M.S Vertical pumps are used for the transfer of sulphuric acid 98%
- Sewage.
- Waste water treatment plant.
- Phosphoric Acid Plant. H,PO,HSIF, 2 s H2SO4, HF And .Their Mixtures.
- Gas washing plant .
- Scrubbed liquids containing , F,Cl,SO2, Ammonia
- Water treatment plant .
- OLUM, CLOTO, NEPTHA
Range
| Parameter | Specification |
|---|---|
| Flow Rate | 200 to 6000 m3 /hr |
| Discharge Head | 4 to 28 m |
| Pump Speed Range | 750 to 1500 rpm |
| Max Solids Size | Up to 100 mm |
| Pump Casing | Cast Iron / Stainless Steel |
| Impeller | Stainless Steel |
| Pump Shaft | ST ST ASTMA-276 TYPE 410 ,Carbon Steel |
| Different Sizes | APM250/34 , APM300/34 , APM350/47, APM400/47, APM450/54 |
Related Products
Hot Water Transfer Pump
The reasoning behind it is straightforward. Materials, seals, and clearances all have to be built around sustained heat, not just a brief exposure to it. A Hot Water Transfer Pump has to keep running hour after hour at temperatures that would degrade seals or warp components in a standard unit, without the flow or performance dropping off. For plants where a high-temperature drain sump can't afford a pump that fails every few months, that heat tolerance is the entire reason this pump gets specified.
Why Choose This Pump
A Hot Water Transfer Pump doesn't struggle where standard pumps give out - that's the whole point of how it's built. Continuous duty or intermittent operation at high temperature, the performance stays consistent either way. Suction extensions, float switches, and duplex configurations are all available, so the pump fits your sump instead of you working around it. A Stainless Steel Sump Pump variant is also available where purity matters alongside temperature resistance.
Performance and Range
- Maximum working temperature: 110°C / 200°C depending on model
- Available lengths: 1 foot up to 12 feet
- Flow capacity: up to 500 m³/h, higher available on request
- Head: up to 120 meters, multi-stage versions for more demanding needs
- Custom builds available for high-temperature or special chemical applications
Models You Can Choose
- Hot Water Transfer Pump for high-temperature fluid movement
- Stainless Steel Sump Pump where purity and hygiene matter
- PP Sump Pump for aggressive chemical environments
- Vertical Cantilever Pump for sumps carrying abrasive or solid-laden media
- Double Bearing Sump Pump for heavy load and high vibration applications
- Duplex pumping station with auto float switch control
Where They Work Best
Industries use our sump pumps in many ways:
- High-temperature drain sumps where standard pumps degrade quickly
- Textile and dyeing units handling hot process water day in and day out
- Power plants and boiler rooms with hot condensate return lines
- Chemical plants running fluid transfer well above ambient temperature
- Any application where a standard pump simply can’t take the heat
Any process that needs a contamination-free pumping system.
Benefits You Get
- Built to run reliably at sustained high temperatures without early failure
- Vertical footprint means less floor space is taken up in a busy plant
- Handles continuous or intermittent duty without performance drop-off
- Float switch and duplex options make automation straightforward
- Available in materials matched to both temperature and chemical exposure
- Backed by Malhar Pump, a manufacturer with years of experience building for high-temperature, demanding conditions
Backed by one of the trusted sump pump manufacturers with years of expertise.
Installation and Support
Share your process details before we finalize a model – fluid temperature, sump depth, flow rate, and any chemical exposure involved. That’s what helps us recommend the right Hot Water Transfer Pump without any guesswork. Once it’s installed, routine inspection is usually all it takes to keep it running well, even under sustained heat.
Get a Quote
Built for durability, our Vertical Sump Pump, Stainless Steel Sump Pump, Vertical Cantilever Pump, Hot Water Transfer Pump, PP Sump Pump, and Double Bearing Sump Pump range delivers consistent, long-lasting performance even under demanding conditions.
Stay connected with us on YouTube and Facebook for the latest updates on fire fighting engines, pump systems, and industrial solutions
FAQ
What is a Hot Water Transfer Pump and where is it used?
It’s a sump pump built to handle sustained high-temperature fluid without the seals or components degrading early. It’s used in high-temperature drain sumps, condensate return lines, and process industries moving hot fluid all day.
How is a Hot Water Transfer Pump different from a standard sump pump?
A standard sump pump isn’t built to hold up under sustained heat – seals and clearances wear out fast. A Hot Water Transfer Pump is engineered specifically to handle that temperature without early failure.
What industries typically use a Hot Water Transfer Pump?
Textile mills, power plants, chemical processing units, and any facility with high-temperature drain sumps rely on a Hot Water Transfer Pump to keep operations running without interruption.
Do you customize a Hot Water Transfer Pump for specific applications?
Yes. Share your fluid temperature, sump depth, flow rate, and any chemical exposure involved, and we’ll recommend a Hot Water Transfer Pump configured specifically for your process.
Engineered for Reliable & Innovative Fluid Solutions
Gen Creative Engineers Limited is a trusted manufacturer of high-performance pumps and fluid handling systems. With a commitment to quality, innovation, and safety, we serve diverse industries with reliable, efficient, and customized engineering solutions.
International Payment Gateway
Contact Info
Quick Links
Our Products
Trust Badges
- ISO 9001:2008 Certified
- Make in India
- CE / Fire Safety / OEM Approved (if applicable)
Copyright © 2026 Gen Creative Engineers Limited | All rights reserved