PP Sump Pump
PP Sump Pump - Malhar Pump
A PP Sump Pump is the practical choice wherever aggressive chemicals are part of daily operation, and cost still matters as much as compatibility. Acids, alkalis, and corrosive solvents eat through standard metal pumps in a matter of months, but a PP Sump Pump takes that same exposure without corroding out or reacting with the fluid passing through it. Chemical plants and effluent treatment setups have relied on this build for years for exactly this reason. At Malhar Pump, we manufacture ours for that kind of aggressive, corrosive-fluid duty.
As a Vertical Sump Pump manufacturer, we build equipment that works in the kind of conditions most pumps are not rated for.
Applications
These pumps are in extensive use in the fields of:
- Pollution Control.
- Filtration .
- Slurries .
- Transferring Corrosive Chemicals .
- Bio gas plants.
- Any types of acidic water lifting .
- M.S Vertical pumps are used for the transfer of sulphuric acid 98%
- Sewage.
- Waste water treatment plant.
- Phosphoric Acid Plant. H,PO,HSIF, 2 s H2SO4, HF And .Their Mixtures.
- Gas washing plant .
- Scrubbed liquids containing , F,Cl,SO2, Ammonia
- Water treatment plant .
- OLUM, CLOTO, NEPTHA
Range
| Parameter | Specification |
|---|---|
| Flow Rate | 200 to 6000 m3 /hr |
| Discharge Head | 4 to 28 m |
| Pump Speed Range | 750 to 1500 rpm |
| Max Solids Size | Up to 100 mm |
| Pump Casing | Cast Iron / Stainless Steel |
| Impeller | Stainless Steel |
| Pump Shaft | ST ST ASTMA-276 TYPE 410 ,Carbon Steel |
| Different Sizes | APM250/34 , APM300/34 , APM350/47, APM400/47, APM450/54 |
Related Products
Vertical Sump Pump
The logic is simple enough. Polypropylene construction resists the same acids and alkalis that would eat through a metal pump within a short time, and it does that without the higher cost of a stainless steel build. A PP Sump Pump holds up under continuous or intermittent operation, keeping performance steady even as it handles fluid that would otherwise call for constant part replacement in a standard pump.
Why Choose This Pump
A PP Sump Pump doesn't struggle with the fluids it's meant for - that's the entire reason it's built this way. Continuous duty or intermittent runs, performance stays consistent either way. Suction extensions, float switches, and duplex configurations are all available, so the pump fits your sump instead of forcing a generic setup on your site. A Stainless Steel Sump Pump variant is also available where hygiene or higher temperatures come into play alongside chemical exposure.
Performance and Range
- Maximum working temperature: 110°C / 200°C depending on model
- Available lengths: 1 foot up to 12 feet
- Flow capacity: up to 500 m³/h, higher available on request
- Head: up to 120 meters, multi-stage versions for more demanding needs
- Custom builds available for special chemical or high-head applications
Models You Can Choose
- PP Sump Pump for aggressive chemical environments
- Stainless Steel Sump Pump where purity and hygiene matter
- Vertical Cantilever Pump for sumps carrying abrasive or solid-laden media
- Double Bearing Sump Pump for heavy load and high vibration applications
- Hot Water Transfer Pump for high-temperature fluid movement
- Duplex pumping station with auto float switch control
Where They Work Best
Industries use our sump pumps in many ways:
- Chemical plants move acids, alkalis, or aggressive solvents through the process
- Effluent treatment plants handling corrosive waste on a continuous basis
- Electroplating and metal finishing units working with harsh chemical baths
- Water treatment facilities dealing with chemically aggressive dosing fluids
- Any application where metal parts would corrode out fast
Any process that needs a contamination-free pumping system.
Benefits You Get
- Resists acids, alkalis, and aggressive chemicals without corroding
- Vertical footprint means less floor space is taken up in a busy plant
- Handles continuous or intermittent duty without performance drop-off
- Lower material cost compared to stainless steel, without giving up chemical resistance
- Float switch and duplex options make automation straightforward
- Backed by Malhar Pump, a manufacturer with years of experience building for corrosive, chemically aggressive conditions
Backed by one of the trusted sump pump manufacturers with years of expertise.
Installation and Support
Share your process details before we finalize a model – fluid type, chemical concentration, sump depth, and flow rate. That’s what helps us recommend the right PP Sump Pump without any guesswork. Once it’s installed, routine inspection is usually all it takes to keep it running well, even in aggressive chemical conditions.
Get a Quote
Struggling with corrosive fluids, high temperatures, or deep sump applications? Malhar Pump’s Vertical Sump Pump, Stainless Steel Sump Pump, Vertical Cantilever Pump, Hot Water Transfer Pump, PP Sump Pump, and Double Bearing Sump Pump are engineered to solve exactly these challenges.
Stay connected with us on YouTube and Facebook for the latest updates on fire fighting engines, pump systems, and industrial solutions
FAQ
What is a PP Sump Pump and where is it used?
It’s a sump pump built from polypropylene to resist acids, alkalis, and aggressive chemicals. It’s used in chemical plants, effluent treatment, and any process where a metal pump would corrode quickly.
How is a PP Sump Pump different from a Stainless Steel Sump Pump?
It comes down to the fluid and the budget. A PP Sump Pump handles aggressive acids and alkalis at a lower cost. A Stainless Steel Sump Pump is the better pick where hygiene, purity, or higher temperatures are involved.
What industries typically use a PP Sump Pump?
Chemical processing, electroplating, effluent treatment, and water treatment facilities all rely on a PP Sump Pump wherever corrosive fluid handling is part of daily operation.
Do you customize a PP Sump Pump for specific applications?
Yes. Share your fluid type, chemical concentration, sump depth, and flow rate, and we’ll recommend a PP Sump Pump configured specifically for your process.
Engineered for Reliable & Innovative Fluid Solutions
Gen Creative Engineers Limited is a trusted manufacturer of high-performance pumps and fluid handling systems. With a commitment to quality, innovation, and safety, we serve diverse industries with reliable, efficient, and customized engineering solutions.
International Payment Gateway
Contact Info
Quick Links
Our Products
Trust Badges
- ISO 9001:2008 Certified
- Make in India
- CE / Fire Safety / OEM Approved (if applicable)
Copyright © 2026 Gen Creative Engineers Limited | All rights reserved